-
Innovation and simplification hallmarks of Bomag cold planer milling machines
Bomag’s two new models of milling machines, the BM500/15 and the BM600/15, feature an innovative rotor geometry to reduce vibration, simplified drum replacement, and increased service...
-
Bomag's new cold planer milling machines feature quick drum replacement
Bomag’s two new models of milling machines, the BM500/15 and the BM600/15, feature an innovative rotor geometry to reduce vibration, simplified drum replacement, and increased service...
-
Roadtec cutter produces fine, straight-line pattern
With new DOT specs for thinner friction courses, proper surface preparation is more important than ever. Delaminating of thin courses is likely when surfaces are prepared with conventional milling....
Hot News
- Bobcat Company breaks ground on $20 million expansion to create innovation, testing and technology facility
- Quarry Academy is set for November 12-14, 2013 in San Antonio
- NAPA Talks Webinar Series: Rethinking Asphalt Recycling
- Intelligent Compaction provides better quality control, resulting in longer pavement life
- Hilti Canada again recognized as one of the Best Workplaces in Canada
-
Innovations in cold milling machines
Wirtgen considers that their two new large asphalt cold milling machines, the W 200 and W 210, will prove to be the most exciting half-lane machines in a generation. The new W 200 is a large but...
-
Dynapac sets new benchmarks in cold planing
Dynapac’s new generation of 500mm (19.7-inch) wide, compact cold planers – the new T models PL500T and PL500TD – are available as three- or four-wheeled units. The PL500T is...
-
Labour-saving cold planer
Dynapac’s 500mm (19.7-inch) wide, three- or four-wheeled compact cold planers - the PL500T and PL500TD - have a maximum cutting depth of 16 cm (6.3 inches) and 20 cm (7.9 inches),...
-
Wide machine stance and tracks on multipurpose mill
The PR330 utility mill is available with either a four track (PR330T) or four wheel (PR330W) drive system to fit the needs of the contractor. The multi-width cutter offers milling widths of 24, 36...
-
PM-200 cold planer includes electronic control
The PM-200 is a high production, highly maneuverable half-lane milling machine that performs controlled full-depth removal of asphalt and concrete pavements in a single pass. Its C18 engine is a...
-
New technology in milling machines
The new Volvo MT2000 is a four-track, front-load, half-lane milling machine powered by a 610-hp Cummins engine. It offers three distinct engine and drum cutting speeds selectable from the...
-
Large but compact milling machine
The W 150 is a large but compact milling machine that can optionally be fitted with milling drums of four feet (1.20 m), four feet three inches (1.30 m) or five feet (1.50 m) working width, letting...
